![Recover mikrotik chr](https://kumkoniak.com/16.jpg)
The IP rating scale for this device is IPX0.
- Place the device in rackmount enclosure and align with the holes so that the device fits conveniently.
- Attach rack ears to both sides of the device and tighten four screws to secure them in place, as shown on the picture to the right.
- Use a Phillips screwdriver to attach rackmount ears on both sides of the device if designated use is for rackmount enclosure: The device is designed to use indoors and it can be mounted in a rackmount enclosure using provided rack mounts, or it can be placed on the desktop. Useful for RouterBOOT debugging and recovery. Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device.
- Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD look for Netinstall servers.
- Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration.
- The device has dual removable (hot-swap compatible) power supply units AC ⏦ 110-240V (5 A) with standard IEC compatible sockets with Maximum power consumption of 32 W, with attachments 49 W. In case the IP connection is not available, the Winbox tool ( ) can be used to connect to the MAC address of the device from the LAN sideįor recovery purposes, it is possible to boot the device for reinstallation, see a section Reset button.
We suggest starting here to get yourself accustomed to the possibilities. RouterOS includes many configuration options in addition to what is described in this document. Click on the Check for updates and on newly opened window choose Download&Install if new version if available.The device will receive an IP if your Network has DHCP server enabled, or if you have entered Network details correct and internet connection will be available.Type a secure password in the Password field and confirm again.Set your local Network IP Address 192.168.88.1.
Set address Acquisition to automatic, or enter your Network details manually.Choose Quick Set on the left side of the screen.Open WinBox on your computer and check Neighbors tab for CCR.
- Connect with your PC to the Ethernet port3.
- Connect your ISP Ethernet cable to the Ethernet port1.
- The device doesn’t have any other configuration applied by default, please set up WAN IP addresses, user password, and update the device. Username is admin and there is no password. The Ethernet port 1 has a default IP address for connecting: 192.168.88.1.